PhoneDB - infinitely detailed




FacebookGoogle PlusRSS FeedTwitter

IntroductionIntroduction: 

BrandBrand name of the device. This may match with the manufacturer Samsung
ModelOne or more (separated by /) specific model name identifies this device. This field often includes Model Code too which can be separated SM-N960D Galaxy Note 9 TD-LTE JP SC-01L / SGH-N058
BriefBrief Introduction: One or two sentences which enumerates some important attributes of the specifc device variant described by this datasheet
Locked variant of Galaxy Note 9 exclusively for docomo (Japan) with One-Seg Full HD tuner
ReleasedFirst official market release date in (year, month) 2018 Oct 26
AnnouncedDate of the official announcement (year, month) 2018 Oct 22
Hardware DesignerThe company which designed this device Samsung Electronics
ManufacturerThe company which produces this device Samsung Electronics
CodenameThe codename internally identified the design project of this product. Model variants of the same model are identified and linked to each other via the same Codename Samsung Crown
General ExtrasHardware extras like stylus, kickstand, rotatatble screen, rotatable keyboard, haptic feedback, etc.  Haptic touch feedbackHaptic (inlcuding kinesthetic) touch device applies forces and vibrations to give feedback to the user when tapping the touchscreen
Device CategorySmartphone, tablet, smart watch, PDA, palmtop, etc.  SmartphoneCallular voice-capable usually touchscreen mobile computer which natively runs third-party apps.
List of Additional FeaturesComma separated list of low priority special features which are not included in other fields
LTE 988/75 Mbps, Bluetooth LE 12-bit pressure-sensitive S Pen (5.7 x 4.35 x 106.37mm, 3.1g, IP68), Samsung Water Carbon Cooling, S Voice, Grace UX, Samsung Infinity Display, Samsung Bixby AI assistant, Samsung Pay, Samsung DeX, HDR10 Premium support, Dolby Atmos sound, 720p 960 fps slow-motion video capture, Samsung Dual Aperture lens, dual pixel PDAF, dual OIS

Physical AttributesPhysical Attributes: 

WidthWidth is horizontally measured between the left and right edges of device according to the default display orientation 76.4 mm
3.01 inchWidth measured in inches
HeightHeight is vertically measured between the bottom and top edges of device according to the default display orientation 161.9 mm
6.37 inchHeight measured in inches
DepthDepth refers to the thickness of the device. Depth is usually the smallest dimension of the device 9.3 mm
0.37 inchesDepth measured in inches
Typical depthThis thickness value can be measured at the most points of the device 8.8 mm
Bounding VolumeThe volume of the smallest cuboid which can bound the device in cubecentimetres 115 ccm
MassThe mass of the device including standard battery and stylus (if any and it can be inserted into the device) measured in grams 201 g
7.09 ouncesThe mass of the device including standard battery and stylus (if any and it can be inserted into the device) measured in ounces

Software EnvironmentSoftware Environment: 

PlatformThe family of the operating system like Android, iOS, Windows Phone/Mobile, Palm OS, etc.  Google Android
Operating SystemPre-installed (usually embedded) operating system which the device was released with. Google Android 8.1 (Oreo)Google Android 8.1 (Oreo)
Software ExtrasNavigation software, voice recognition, face recognition, personal assistant app, etc.  Voice Command , Business card recognitionThis feature allows the device to scan and recognize (OCR) a physical businass card with the built-in camera and a business card recognizer software. , Navigation softwarepre-installed , Augmented Reality (AR) , Virtual Reality (VR) support , Intelligent personal assistantLearning personal assistant based on artificial intelligence (AI) , Voice RecognitionUser identification by voice , Face RecognitionFace identification by built-in camera

Application processor, ChipsetApplication processor, Chipset: 

CPU ClockFrequency of the square signal which schedules the internal operation of microprocessor (synchronous sequential logic). The current consumed by the processor is approximately proportional to clock rate. 2800 MHz
CPUManufacturer part number and most important characteristics of the IC which includes the main application processor or processors Qualcomm Snapdragon 845 SDM845 (Napali), 2018, 64 bit, octa-core, 32 Kbyte I-Cache, 32 Kbyte D-Cache, 1536 Kbyte L2, 2048 Kbyte L3, 10 nm, Qualcomm Adreno 630 GPUQualcomm Snapdragon 845 SDM845 (Napali), 2018, 64 bit, octa-core, 32 Kbyte I-Cache, 32 Kbyte D-Cache, 1536 Kbyte L2, 2048 Kbyte L3, 10 nm, Qualcomm Adreno 630 GPU

Operative MemoryOperative Memory: 
RAM TypeType of volatile memory IC which specifies RAM architecture, timing characteristics, refresh mode, voltage levels and physical design of the IC. Two major types of random-access memory is static RAM (SRAM) periodically refreshed dynamic RAM (DRAM).  LPDDR4x SDRAM
1866 MHzClock frequency of the RAM databus (not necessarily equivalent to data transfer frequency). The width of the databus (e.g. 64 bit), RAM type (e.g. DDR SDRAM), number of channels and clock rate (e.g. 200 MHz) determines peak transfer rate
RAM CapacityCapacity of the random access memory in mebibytes (binary megabytes) 6144 MiB RAM

Non-volatile MemoryNon-volatile Memory: 
Non-volatile Memory TypeType of NV memory IC which determines storage technology, programming / erasing method and write endurance  Flash EEPROM
Non-volatile Memory InterfaceInterface (e.g. UFS 2.0, eMMC 5.1, moviNAND) which determines physical layer (width, clock rate, lanes, protocol) of data transfer between the application processor and the NV memory  UFS 2.1UFS revision 2.1 (released in 2016) defines single-lane 600 MB/s or dual-lane 1.2 GB/s NAND flash EEPROM interface
Non-volatile Memory CapacityNon-volatile memory in mebibytes (binary megabytes).2GB = 1907.3MiB, 4GB = 3814.7MiB, 8GB = 7629.4MiB, 16GB = 15258.8MiB, 32GB = 30517.6MiB, 64GB = 61035.2MiB, 128GB = 122070.3MiB, 256GB = 244140.6MiB, 512GB = 488281.3MiB, 1TB = 953674MiB, 2TB = 1907349Mi 122070 MiB non-volatile

DisplayDisplayAll parameters that related to display

Display DiagonalThe distance measured between the furthest corners of the display. In case of display with rounded edges this refers to the diagonal of the smallest bounding rectangle. 162 mm
6.4 inchDisplay Diagonal in inches
ResolutionHorizontal and vertical resolution of the primary display. In case of display with rounded edges this refers to the smallest bounding rectangle. 1440x2960
4262400 pixelsThe total number of pixels is the product of horizontal and vertical number of pixels
Display WidthThe distance between the vertical edges of the display (horizontal display size). In case of display with rounded edges this refers to the smallest bounding rectangle. 70.87 mm
2.79 inchDisplay width in inches
Display HeightThe distance between the horizontal edges of the display (vertical Display Size). In case of display with rounded edges this refers to the smallest bounding rectangle. 145.68 mm
5.74 inchDisplay height in inches
Horizontal Full Bezel WidthDefined as the sum of width of left and right vertical display bezels. If the display panel is located in the middle width of left and right bezels are the same and their width is the half of the full bezel width. 5.53 mm
Display AreaCalculated display area is the product of max. horizontal and vertical display sizes. In case of display with rounded edges or notch this refers to the smallest display bounding rectangle. 10324 square millimeter
Display Area UtilizationRegular display area per regular front panel area ratio. This approximated indicator does not count with possible rounded corners (neither on front panel nor on display) or display notches, holes. 83.5%
Pixel SizeCalculated pixel size based on display diagonal, resolution and aspect ratio 0.04921 mm/pixel
Pixel DensityIndicates the number of pixels per inch 516 PPI
Display TypeDisplay technology, e.g. Color/ monochrome e-ink, STN, PM-OLED, AM-OLED, TN-TFT, IPS TFT, ASV TFT, MVA TFT, PVA TFT, PLS TFT  Color AM-OLEDColor AM-OLED (Active Matrix - Organic Light-emitting Diode) display techology. display
Display SubtypeBrand name of the subtype/technology of the screen like Super AMOLED, SLCD2/3/5, Retina Display, Reality Display, ClearBlack, etc.  Super AM-OLEDSuper AM-OLED is an improved type of AM-OLED display technology developed by Samsung where touch-sensitve layer is integrated into the screen. Super AM-OLED uses Samsung PenTile matrix RGBG subpixel arrangement (2 subpixels)
Display Color DepthColor depth defines how many colors or greyscales can be displayed 24 bit/pixel
Number of Display ScalesMaximal number of displayable colors or scales 16.8M
Display Dynamic Range DepthBit depth of the dynamic range defines the luminance ratio between the brightest and the darkest state of a pixel (HDR10: 10 bit, HDR10+: 12 bit) 10 bit/pixel
Display IlluminationForm of illumination used for lighting or backlighting LCD display in dark and dim ambient condtions.  Self-illuminatingOLED-based display technologies do not require illumination because they are built up from organic light-emitting diodes.
Display Subpixel SchemeSpecifies how and how many subpixels are pixels consists of. Usual schemes: RGB, RGBG, RGBW, PenTile, Diamond Pixel  RGBG PenTile Matrix (2 subpixels)PenTile RGBG is a subpixel rendering sceme developed in 1999. In a PenTile matrix each pixel has 2 subpixels. Green subpixel is shared with neighboring pixels so the pixel density can be higher but image quality is lower than RGB's.
Scratch Resistant ScreenUsual types: Gorilla Glass generations, DragonTrail/X, Sapphire Glass  Corning Gorilla Glass 5Introduced in 2016

Graphical SubsystemGraphical Subsystem: 
Graphical ControllerManufacturer and part number of the graphics controller IC or commercial name of the intellectual property (IP) if the graphics controller is the part of a chipset Qualcomm Adreno 630
Dedicated Graphics MemoryDedicated operative memory (video RAM, VRAM) of graphics controller or GPU which independent from the op. memory of the main processor. Graphics controller may have access to the main RAM (shared RAM) too 1 MiB
GPU Clock 710 MHz

Audio/Video InterfacesAudio/Video Interfaces: 
A/V OutAudio/Video outputs form a heterogeneous group of interfaces that allow the user to connect the device to various external analog/digital multimedia devices (monitors, projectors, HD TVs) and play multimedia content. For example: MHL, DisplayPort, HDMI, e  DisplayPort (Unspecified)
USB Type-C reversiblePhysical interface of the A/V out port. For example: HDMI D, USB-C, micro-USB or DB25
A/V Out Max. ResolutionThe largest resolution supported by video out  3840x2160 (2160p) 4K UHD

Audio SubsystemAudio Subsystem: 

Audio Channel(s)Number of independent channels supported by the audio subsystem of the device, e.g.: mono, stereo, 5.1, 7.1, etc.  stereo

Sound Recording: 
Microphone(s)Analog or digital sound receiver. Main applications: voice calls, active noise cancellation, voice command, voice/video recording, voice identification  stereo

Sound Playing: 
D/A Converter Nominal ResolutionThe resulution (R) of the digital/analog converter which converts a series of R-wide binary samples to the analog voltage signal of the built-in speaker or audio out   32 bit quantization
Loudspeaker(s):   stereo
Audio Output:   3.5mm

Cellular PhoneCellular Phone: 

Supported Cellular BandsList of supported cellular networks with band names. For example GSM900 refers to the GSM system with the 890-915 MHz uplink and 935-960 downlink bands.  GSM 850MHz (B5)GSM850 phones support GSM 850 MHz (B5) band (downlink: 869.2 MHz - 894.2 MHz, uplink: 824.2 MHz - 849.2 MHz) , GSM 900MHz (B8)GSM900 phones support P-GSM (Primary GSM) 900 MHz (B8) band (downlink: 935.0 MHz - 960.0 MHz, uplink: 890.0 MHz - 915.0 MHz) and may support E-GSM (Extended GSM) 900 MHz band (downlink: 925.0 MHz - 960.0 MHz, uplink: 880.0 MHz- 915.0 MHz. , GSM 1800MHz (B3)GSM1800 phones support GSM / DCS / PCS 1800 MHz (B3) band (downlink: 1805.2 - 1879.8 MHz, uplink: 1710.2 - 1784.8 MHz). , GSM 1900MHz (PCS, B2)GSM1900 phones support PCS 1900 MHz (B2) band (downlink: 1930.2 - 1989.8 MHz, uplink: 1850.2 - 1909.8 MHz) , UMTS 2100MHz (Band I, IMT)UMTS2100 phones support UMTS 1900 / 2100MHz (IMT, also refferred as UMTS Band I) band (downlink: 2112.4 - 2167.6 MHz, uplink: 1922.4-1977.6 MHz) , UMTS 1700/2100MHz (Band IV, AWS)UMTS1700/2100 phones support UMTS 1700 / 2100 MHz (AWS, also refferred as UMTS Band IV) band (downlink: 2112.4 - 2152.6 MHz, uplink: 1712.4-1752.6 MHz) , UMTS 850MHz (Band V, CLR)UMTS850 phones support UMTS 850 MHz (CLR, also refferred as UMTS Band V) band (downlink: 871.4 - 891.6 MHz, uplink: 826.4 - 846.6 MHz) , UMTS 800MHz (Band VI)UMTS800 phones support UMTS 800 MHz (UMTS Band 6) band (downlink: 875 - 885 MHz, uplink: 830-840 MHz) , UMTS 800MHz (Band XIX)UMTS800 phones support UMTS 800 MHz (UMTS Band 6) band (downlink: 877.4 - 887.6 MHz, uplink: 832.4-842.6 MHz) , CDMA 1700/2100MHz (BC15, AWS)CDMA1700/2100 phones support 1700 / 2100 MHz AWS (Advanced Wireless Services, also referred as CDMA Band Class 15) band (downlink: 2110 - 2155 MHz, uplink: 1710 - 1755 MHz) , TD-SCDMA 2000 MHz (B34)TD-SCDMA2000 phones support TD-SCDMA 2000 MHz (B34) band (2010 - 2025 MHz) , TD-SCDMA 1900 MHz (B39)TD-SCDMA1900 phones support TD-SCDMA 1900 MHz (B39) band (1880 - 1920 MHz) , LTE 2100 MHz (Band 1)LTE2100 phones support LTE 1900 / 2100MHz (IMT, also refferred as LTE Band 1) band (downlink: 2110 - 2170 MHz, uplink: 1920 - 1980 MHz) , LTE 1800 MHz (Band 3)LTE1800 phones support LTE 1800 MHz (LTE Band 3) band (downlink: 1805 - 1880 MHz, uplink: 1710 - 1785 MHz) , LTE 1700/2100 MHz (Band 4, AWS)LTE1700/2100 phones support LTE 1700 / 2100 MHz (AWS also referred as LTE Band 4) band (downlink: 2110 - 2155 MHz, uplink: 1710 - 1755 MHz) , LTE 850 MHz (Band 5)LTE850 phones support LTE 850 MHz (LTE Band 5) band (downlink: 869 - 894 MHz, uplink: 824 - 849 MHz) , LTE 2600 MHz (Band 7)LTE2600 phones support LTE 2600 MHz (LTE Band 7) band (downlink: 2620 - 2690 MHz, uplink: 2500 - 2570 MHz) , LTE 700 MHz (Band 12)LTE700 phones support LTE 700 MHz (LTE Band 12) band (downlink: 728 - 746 MHz, uplink: 698 - 716 MHz) , LTE 700 MHz (Band 13)LTE700 phones support LTE 700 MHz (LTE Band 13) band (downlink: 746 - 756 MHz, uplink: 777 - 787 MHz) , LTE 700 MHz (Band 17)LTE700 phones support LTE 700 MHz (LTE Band 17) band (downlink: 734 - 746 MHz, uplink: 704 - 716 MHz) , LTE 800 MHz (Band 19)LTE800 phones support LTE 800 MHz (LTE Band 19) band (downlink: 875 - 890 MHz, uplink: 830 - 845 MHz) , LTE 1500 MHz (Band XXI)LTE1500 phones support LTE 1500 MHz (LTE Band 21) band (downlink: 1495.5 - 1510.9  MHz, uplink: 1447.9 - 1462.9  MHz) , LTE 700 MHz (Band 28)APT700 phones support LTE 700 MHz (LTE Band 28) band (downlink: 758 - 803 MHz, uplink: 703 - 748 MHz) , TD-LTE 2600 MHz (Band 38)TD-LTE 2600 MHz phones support TD-LTE 2600 MHz (LTE Band 38) band (2570 - 2620 MHz) , TD-LTE 1900 MHz (Band 39)TD-LTE 1900 MHz phones support Chinese TD-LTE 1900 MHz (LTE Band 39) band (1880 - 1920 MHz) , TD-LTE 2300 MHz (Band XL)TD-LTE 2300 phones support Chinese TD-LTE 2300 MHz (LTE Band 40) band (2300 - 2400 MHz) , TD-LTE 2500 MHz (Band XLI)TD-LTE 2500 MHz phones support TD-LTE 2500 MHz (LTE Band 41) band (2496 - 2690 MHz) , TD-LTE 3500 MHz (Band XLII)TD-LTE 3500 MHz phones support TD-LTE 3500 MHz (LTE Band 42) band (3400 - 3600 MHz) bands
Supported Cellular Data LinksList of supported cellular data links and rates.  GPRS (Class unspecified)General Packet Radio Service , GPRS Class 12 , GPRS Multi-slot Class 33 , EDGE (Class unspecified)Enhanced Data Rates for GSM Evolution also known as Enhanced GPRS (EGPRS) , EDGE Multi-slot Class 12 , UMTS 384 kbps (W-CDMA)Universal Mobile Telecommunications System. UMTS Release '99 data link layer, W-CDMA grants up to 384 kbit/s pocket-switched download speed. , HSUPA (Cat. unspecified)High-Speed Uplink Packet Access is a 3.5G UMTS uplink protocol. , HSUPA 5.76 Mbps (Cat. 6) , HSDPA (Cat. unspecified)High-Speed Downlink Packet Access is a 3.5G UMTS downlink protocol. , HSDPA 14.4 Mbps (Cat. 10) , cdmaOne (IS-95) , CDMA2000 1xRTT (IS-2000) , CDMA2000 1xEV-DO Rel. 0 , CDMA2000 1xEV-DO Revision A , TD-SCDMATime Division Synchronous Code Division Multiple Access is the implementation of UMTS  (3G) cellular network in China. , TD-HSDPA , LTE (Cat. unspecified)LTE (Long Term Evolution) or the E-UTRAN (Evolved Universal Terrestrial Access Network), introduced in 3GPP R8, is the 4G access part of the Evolved Packet System (EPS). , LTE 100 Mbps / 50 Mbps (Cat. 3)LTE 100.8 Mbps / 50.4 Mbps (Cat. 3) , LTE 150 Mbps / 50 Mbps (Cat. 4)LTE 151.2 Mbps / 50.4 Mbps (Cat. 4) , LTE 300 Mbps / 50 Mbps (Cat. 6)More exact values: LTE 301.5 Mbps / 50.4 Mbps (Cat. 6) , LTE 300 Mbps / 75 Mbps (Cat. 5)LTE 299.6 Mbps / 75.6 Mbps (Cat. 5) , LTE 1 Gbps / 100 Mbps (LTE Cat. 16)LTE Category 16: 979 Mbps downlink, 5 CA, 105 Mbps uplink data links
SIM Card SlotSupported Subscriber Identification Card (SIM) Format like mini-SIM, micro-SIM, nano-SIM, embedded SIM, etc.  Nano-SIM (4FF)
Cellular AntennaPhysical antenna layout. Most common type: internal. Historic types: fixed external, pull-out, open-out  Internal antenna
Call Alert SoundPolyphonic or monophonic call alert sound (number of chords) 128-chord melody
Hearing Aid Compatibility (HAC)Hearing Aid Compatibility (HAC) rate, For example: M3/T4  M4 , T3
Complementary Phone ServicesPossible extras: voice transmission, voice speaker, vibration, speakerphone, active noise cancellation, PTT, HD Voice, VoLTE, etc.  Voice transmissionDevice is able to receive and transmit voice over cellular network , Voice speakerDedicated voice speaker is located near to the ear when talking and optimized for the spectrum and peak-to-peak range of the human voice. , Vibrating Alert , Speakerphone , ANCActive noise cancellation (ANC) , HD Voice , Voice over LTE (VoLTE)
Cellular ControllerManufacturer part number of the cellular modem and controller IC or commercial name of the intellectual property (IP) if the function is the part of a chipset Qualcomm SDM845
SAR (head)Measured SAR value at head configuration 0.220 W/kg
US standard (max. 1.6 W/kg @ 1g)In case of US (FCC) standard SAR limit is 1.6 W/kg averaged over the 1 g of tissue. measurement methodSAR measurement method (US, EU, etc.) defines the head measurement  procedure, scaling and reference tissue mass (1g, 10g, etc.)
UMTS 850MHz (Band V, CLR)UMTS850 phones support UMTS 850 MHz (CLR, also refferred as UMTS Band V) band (downlink: 871.4 - 891.6 MHz, uplink: 826.4 - 846.6 MHz) measurement bandCellular technology and frequency band where the measurement was executed on.
SAR (body)Measured SAR value at body configuration 0.390 W/kg
US standard (max. 1.6 W/kg @ 1g)In case of US (FCC) standard SAR limit is 1.6 W/kg averaged over the 1 g of tissue. measurement methodSAR measurement method (US, EU, etc.) defines the measurement procedure, scaling and reference tissue mass (1g, 10g, etc.)
LTE 1700/2100 MHz (Band 4, AWS)LTE1700/2100 phones support LTE 1700 / 2100 MHz (AWS also referred as LTE Band 4) band (downlink: 2110 - 2155 MHz, uplink: 1710 - 1755 MHz) measurement bandCellular technology and frequency band where the body measurement was executed on.
SAR (hotspot)Measured SAR value at head worst configuration 1.020 W/kg
US standard (max. 1.6 W/kg @ 1g)In case of US (FCC) standard SAR limit is 1.6 W/kg averaged over the 1 g of tissue. measurement methodHotspot SAR measurement method
GSM 850MHz (B5)GSM850 phones support GSM 850 MHz (B5) band (downlink: 869.2 MHz - 894.2 MHz, uplink: 824.2 MHz - 849.2 MHz) measurement bandHotspot SAR measurement band
2nd highest SAR (head)Additional head SAR value 0.180 W/kg
US standard (max. 1.6 W/kg @ 1g)In case of US (FCC) standard SAR limit is 1.6 W/kg averaged over the 1 g of tissue. measurement methodAdditional head SAR measurement method
GSM 850MHz (B5)GSM850 phones support GSM 850 MHz (B5) band (downlink: 869.2 MHz - 894.2 MHz, uplink: 824.2 MHz - 849.2 MHz) measurement band Additional head SAR band
2nd highest SAR (body)Additional body SAR value 0.850 W/kg
US standard (max. 1.6 W/kg @ 1g)In case of US (FCC) standard SAR limit is 1.6 W/kg averaged over the 1 g of tissue. measurement method Additional body SAR measurement method
UMTS 850MHz (Band V, CLR)UMTS850 phones support UMTS 850 MHz (CLR, also refferred as UMTS Band V) band (downlink: 871.4 - 891.6 MHz, uplink: 826.4 - 846.6 MHz) measurement bandAdditional body SAR band

Secondary Cellular PhoneSecondary Cellular Phone: 
Sec. Supported Cellular Networks:   No

Control PeripheralsControl Peripherals: 

Touchscreen TypeDetermines how the touchscreen module senses the touch of the screen  Capacitive multi-touch sensing screen
Touchscreen Simultaneous Touch PointsDetermines how many touches the touch-sensitive screen module is able to simultaneously detect at most  10-point


Communication InterfacesCommunication Interfaces: 

Expansion InterfacesNon-volatile memory and/or I/O expansion interfaces. For example: microSD, microSDXC, SDHC, CF II., PCMCIA III., etc.  TransFlash , microSDSupports memory cards with capacity of up to 2GB and may comply with some (not HC) memory cards with higher capacity than 2GB  , microSDHCA micro-SDHC-capable device supports High Capacity (SD 2.0/HC) memory cards with capacity of up to 32GB. , microSD Extended CapacityA microSDXC-capable device supports eXtended-Capacity memory cards with capacity of up to 128 GB, 256 GB or 2 TB.
USBFirst or the only USB port. USB is a common high-speed serial bus standard that allows data and power transfer between the mobile device and another computer. Version of USB identifies USB standard.  USB 3.0 / USB 3.1 Gen 1 / USB 3.2 Gen 1x1Released in November 2008, USB 3.0 specification introduced USB SuperSpeed enabling devices to communicate at 5 Gbit/s. Later renamed as USB 3.1 Gen 1, then  USB 3.2 Gen 1x1
USB Hi-Speed (480 Mbps)Determines the highest available data transfer speed of first USB port. Usual standard speed levels: High-Speed (HS), Super-Speed (SS)
USB ServicesPossible services: USB power supply, USB charging, USB fast charging, USB host, OTG, etc.  USB chargingThe device is able to charge its battery supplied from the USB port. , USB fast chargingFast charging is supported , USB HostUSB host devices are capable of controlling USB client devices, like mass storage devices, mouse, keyboard, camera, printer, scanner, etc. , USB On-The-Go 1.3 , USB On-The-Go 2.0 , USB Power DeliveryDevice which meets USB Battery Charging Specification Revision 1.1 / 1.2 is able to supply current from 500 mA to 1.5 A for the client device at 5V.
USB ConnectorPhysical USB connector layout. Most common types: micro-USB, USB A, USB Type-C or proprietary (e.g. Lightning)  USB Type-C reversible
BluetoothIEEE 802.15 is a short-range radio technology standard that allows transfer of data, and the use of accessories such as wireless audio devices and printers. This field specifies the supported BT version.  Bluetooth 5.0Released in Dec, 2016
Internal antenna
Bluetooth profilesList of supported Bluetooth profiles e.g. aptX, A2DP, AVRCP, HSP, HID, PBA, PAN, OPP, MAP  A2DPAdvanced Audio Distribution Profile , A2DP with aptX codecAdvanced Audio Distribution Profile with aptX codec , AVRCPAudio/Video Remote Control Profile (AVRCP) , DIPDevice ID Profile (DIP) , HFPHands-Free Profile (HFP) , HIDHuman Interface Device Profile (HID) , HSPHeadset Profile (HSP) , MAPMessage Access Profile (MAP) , OPPObject Push Profile (OPP) , PANPersonal Area Networking Profile (PAN) , PBAPhone Book Access Profile (PBA)
Wireless LANWireless LAN / WLAN / Wi-Fi: 802.11 defines a medium-range wireless data link that allows for internet access and data transfer. This field enumerates the supported protocols (e.g. 802.11a/b/g/n).  IEEE 802.11aShort range standard, 5 GHz, max. 54 Mbit/s , IEEE 802.11b2.4 GHz (ISM band), max. 11 Mbit/s , IEEE 802.11i , IEEE 802.11g2.4 GHz (ISM band), max. 54 Mbit/s , IEEE 802.11n2.4 GHz (ISM band) or optional 5 GHz support, max. 600 Mbit/s thanks to MIMO antennas , IEEE 802.11r , IEEE 802.11ac2.4 GHz (ISM band) or optional 5 GHz support (4915...5825 MHz), max. 1300 Mbit/s thanks to MIMO antennas
Internal antenna
Wireless ServicesPossible extras: Miracast, DLNA, WiFi Tethering, UPnP, WiFi Display, AirPlay, etc.  DLNADLNA (Digital Living Network Alliance) over Wireless LAN , MiracastMiracast screensharing standard uses Wi-Fi Direct connection , Wi-Fi Direct , Wi-Fi TetheringWi-Fi Mobile Hotsport , Wi-Fi Calling (VoWiFi)Voice over WiFi (VoWiFi)
NFCNear Field Communication is short-range wireless radio data exchange technology based on radio-frequency identification (RFID). This field enumerates the supported NFC technologies.  NFC AISO/IEC 14443 Type A , NFC BISO/IEC 14443 Type B , FeliCaFelicity Card RFID smart card system for Japan developed by Sony.

Multimedia BroadcastMultimedia Broadcast: 

FM Radio ReceiverWith a bulit-in FM radio the device is able to receive FM (frequency modulated) broadcast in 79 - 108 MHz band.  No
Digital Media BroadcastDigital multimedia (TV/audio) broadcast technologies like T-DMB, ISDB-T 1-seg, ISDB-T HDTV, DAB+, DVB-T, CMMB, etc.  ISDB-T One-SegISDB-T QVGA (Japan) , ISDB-T Full-SegISDB-T Full HD (Japan) receiver
Internal antenna and external antenna jack

Satellite NavigationSatellite Navigation: 

Supported GPS protocol(s)Possible protocols: NMEA 0183, SIRF, etc.  GPS (NMEA 0183)NMEA 0183
Satellite Antenna:   Internal antenna
Complementary Satellite ServicesPossible extras: S-GPS, A-GPS, Geotagging, TMC, QuickGPS, QZSS, etc.  Simultaneous GPS (S-GPS) , Assisted GPS , Geotagging , QuickGPS , QZSSQuasi-Zenith Satellite System
Supported GLONASS protocol(s)GLONASS is a global satellite  navigation system operated by Russia.  L1OFGLONASS L1OF FDMA signal centered at 1602 MHz, features a BPSK(0.5) modulation.
Supported Galileo service(s)Galileo is a global satellite  navigation system operated by European Union and the European Space Agency.  E1Galileo E1 band centered at 1575.42  MHz and with a reference bandwidth of 24.552 MHz, uses the Composite Binary Offset Carrier (CBOC) modulation
Supported BeiDou system (BDS)BeiDou System (BDS) is a Chinese satellite navigation system. Its global variant is the BeiDou-2 alias COMPASS.  B1IBeiDou-2 (COMPASS) B1I signal transmitted by BDS-2 satellites is centered at 1561.098 MHz, featuring a QPSK(2) modulation BeiDou receiver
Navigation ControllerManufacturer part number of the GNSS (GPS, GLONASS, Galileo and/or BDS) controller IC or commercial name of the intellectual property (IP) if the controller is the part of a chipset Qualcomm SDM845 iZat

Primary Camera SystemPrimary Camera SystemPrimary camera usually has better imaging capabilities than secondary camera if any

Camera PlacementRefers to the placement of the primary camera on the device. Front, rear or rotatable. Generally rear.  Rear
Camera ModuleManufacturer part number or commercial name of the primary camera module Sony IMX345
Camera Image SensorRefers to the semiconductor technology of image sensor (FSI CMOS, BSI CMOS, etc.)  BSI CMOSBackside Illuminated CMOS (Complementary MOS circuit)
Image Sensor FormatThe format of the image sensor determines the physical dimensions of the image sensor 1/2.55
Image Sensor Pixel SizePixel size of the primary camera sensor 1.40 micrometer
Camera ResolutionA measurement of the maximum horizontal and vertical pixel numbers at which the camera can take a picture 4032x3024 pixel
Number of effective pixelsA measurement of the maximum pixel number at which the camera can take a picture, often referred to as Megapixels (when horizontal and vertical measurements are multiplied) 12.2 MP camera
Aperture (W)Wide-angle aperture of lens or aperture of lens in case of camera without optical zoom f/1.50
Aperture (T)Telephoto aperture of lens in case of camera with optical zoom f/2.40
ZoomA feature that changes the focal length of the lens of a camera. Optical zoom requires the lens to move in and out, providing high-quality close ups from a distance 2.0 x optical zoom
10.0 x digital zoomDigital zoom is an image signal processing method which cuts out and enlarges a desired part of the captured image while losing the rest of the image
FocusCD AF, PD AF, Laser AF, etc. No / Not supported means there is no adjustable optical system or no camera built-in at all  Contrast Detection Autofocus (CD AF)Contrast-detection (CD) is a passive autofocus method without distance measurement which adjusts the optical system until maximum contrast is measured through the lens. , Phase-Detection Autofocus (PD AF)Phase-detection (PD) is a passive autofocus system which measures the phase difference between a two images to reach correct focus.
Recordable Image FormatsSupported file formats while capturing photos by primary camera  JPG
Video RecordingA measurement of the maximum horizontal and vertical pixel numbers at which the primary camera can capture video 4096x2160 pixel
60 fpsRecording frame rate when recording video at maximum resolution
Recordable Video FormatsSupported file formats while capturing videos  3G2 , HEVCHigh Efficiency Video Coding (HEVC) with H.265 codec (MPEG-H Part 2)
FlashA flash is used to brighten dark areas when taking photographs; is also used as a flashlight. This field contains the exact type of the flash.  dual LED
Camera Extra FunctionsPopular extra features of the primary camera: EIS, EIS for video, OIS, OIS for video, Face detection, 3D photo, HDR photo, HDR video, Macro mode, Panorama Photo, Red-eye reduction, Refocus, Smile detection, Slow motion video, Burst mode, Face Retouch  Electronic Image Stabilizer (EIS)EIS (or digital IS) uses further buffer pixels around the active pixel matrix and dinamically shifts the recorded image in 4 direction to compensate the motion of the camera. , Video Stabilizer (EIS) , Optical Image Stabilization (OIS)OIS (also know as IS, OS, VR, AS) utilizies precision electromechanic actuators in the lens which modifies the optical path to the image sensor to compensate the motion of the camera. , Video Stabilizer (OIS) , HDR photoHigh dynamic range image recording , HDR videoHigh-dynamic-range video recording , Red-eye effect reduction , Slow motion videoSlowmo cameras are able to achieve at least 100 frame per second frame rate. , Burst mode , RefocusRefocus function allows you take a photo first and decide what you want to see in focus later. , Touch focus , Macro modeAn autofocus feature that allows for close-up photographs to be taken with the onboard digital camera , Panorama Photo , Face detection , Face tagging , Smile detection , Face retouch , Face retouch (video) , Intelligent scene detection

Auxiliary Camera: 
Aux. Camera Image SensorAuxiliary camera image sensor technology in at least dual lens setup  BSI CMOSBackside Illuminated CMOS (Complementary MOS circuit)
Aux. Cam. Image Sensor FormatAuxiliary camera sensor format in dual lens setup 1/3.40
Aux. Camera Number of Pixels Number of effective pixels of Auxiliary Camera (2nd camera of primary camera system) in at least dual lens camera setup 12.2 MP aux. cam
Aux. Camera Aperture (W)Wide-angle aperture of aux. lens or aperture of aux. lens in case of aux. camera without optical zoom f/2.40
Aux. Camera FocusCD AF, PD AF, etc. No / Not supported means there is no adjustable aux. optical system  Contrast Detection Autofocus (CD AF)Contrast-detection (CD) is a passive autofocus method without distance measurement which adjusts the optical system until maximum contrast is measured through the lens. , Phase-Detection Autofocus (PD AF)Phase-detection (PD) is a passive autofocus system which measures the phase difference between a two images to reach correct focus.
Aux. Camera Extra FunctionsPopular extra features of the aux. camera: OIS, EIS, HDR photo  Optical Image Stabilization (OIS)OIS (also know as IS, OS, VR, AS) utilizies precision electromechanic actuators in the lens which modifies the optical path to the image sensor to compensate the motion of the camera. , HDR photoHigh dynamic range image recording , HDR videoHigh-dynamic-range video recording , Burst mode , RefocusRefocus function allows you take a photo first and decide what you want to see in focus later. , Touch focus , Macro modeAn autofocus feature that allows for close-up photographs to be taken with the onboard digital camera , Panorama Photo , Face detection , Smile detection

Auxiliary Camera No. 2: 
Aux. 2 Camera Image SensorAuxiliary 2 camera image sensor technology in at least triple lens setup  No

Auxiliary Camera No. 3: 
Aux. 3 Camera Image SensorAuxiliary 3 camera image sensor technology in at least quad lens setup  No

Auxiliary Camera No. 4: 
Aux. 4 Camera Image SensorAuxiliary 4 camera image sensor technology in at least penta lens setup  No
Aux. 4 Camera FocusFocusing method of the fourth auxiliary camera  No

Secondary Camera SystemSecondary Camera SystemWidely used for video telephony or taking selfies

Secondary Camera PlacementRefers to the placement of the secondary camera on the device. Front or rear. Generally front camera for selfies or video call.  Front
Secondary Camera SensorRefers to the semiconductor technology of sec camera image sensor (FSI CMOS, BSI CMOS, etc.)  BSI CMOSBackside Illuminated CMOS (Complementary MOS circuit)
Secondary Image Sensor FormatThe format of the sec. camera image sensor determines the physical dimensions of the sensor 1/3.60
Secondary Image Sensor Pixel SizePixel size of the secondary camera image sensor 1.22 micrometer
Secondary Camera ResolutionA measurement of the maximum horizontal and vertical pixel numbers at which the secondary camera can take a picture 3264x2448 pixel
Secondary Camera Number of pixelsA measurement of the maximum pixel number at which the sec. camera can take a picture, often referred to as Megapixels (when horizontal and vertical measurements are multiplied) 8.0 MP sec. cam
Secondary Aperture (W)Wide-angle aperture of lens or aperture of lens in case of secondary camera without optical zoom f/1.70
Secondary Camera FocusFocus methods of secondary camera  Contrast Detection Autofocus (CD AF)Contrast-detection (CD) is a passive autofocus method without distance measurement which adjusts the optical system until maximum contrast is measured through the lens.
Secondary Recordable Image FormatsSupported file formats while capturing photos by secondary camera  JPG
Secondary Video RecordingA measurement of the maximum horizontal and vertical pixel numbers at which the secondary camera can capture video 2560x1440 pixel
30 fpsRecording frame rate when recording video by the secondary camera at maximum resolution
Secondary Recordable Video FormatsSupported file formats while capturing videos by the secondary camera  3G2
Secondary Camera Extra FunctionsPopular extra features of the secondary camera: Face detection, HDR photo, Selfie Panorama, Smile detection, Face Retouch / Face Beautification  HDR photoHigh dynamic range image recording , HDR videoHigh-dynamic-range video recording , Slow motion videoSlowmo cameras are able to achieve at least 100 frame per second frame rate. , Burst mode , Touch focus , Panorama Photo , Face detection , Face tagging , Smile detection , Face retouch , Face retouch (video) , Intelligent scene detection

Secondary Auxiliary Camera: 
Sec. Aux. Cam. Image SensorImage sensor technology of sec. auxiliary camera in at least dual lens secondary camera setup  No

Secondary Auxiliary Camera No. 2: 
Sec. Aux. 2 Cam. Image SensorImage sensor technology of sec. auxiliary 2 camera in at least triple lens secondary camera setup  No

Built-in SensorsBuilt-in Sensors: 

Built-in compassBuilt-in electroinc compass types: 1D, 2D, 3D  3D (3-axis) compass
Built-in accelerometerAn internal component that senses acceleration components of the device.  Used for automatic screen rotation and for games and applications that rely on acceleration measurement  on X, Y, and Z axis. Possible types: 1D, 2D, 3D  3D (3-axis) accelerometer
Built-in gyroscopeAn internal component that senses the orientation of the device.  Used for automatic screen rotation and for games and applications that rely on the devices position in the X, Y, and Z axis. Possible types: 1D, 2D, 3D  3D (3-axis) gyro
Additional sensorsBuilt-in ambient (barometer, temperature, altimeter, light, etc.), biometric (fingerprint, HR, step, etc.) and comfort (hall sensor, gesture sensor, proximity, etc.) sensors  Barometer , Fingerprint sensorDevice is able to identify the user by using a built-in dedicated biometric fingerprint recogniser sensor placed at the front, rear or any side of the device , Gesture sensor , Hall sensor , Heart rate sensor , Iris scanner , Light intensity sensorBy measuring the intensity of the ambient light device may control the brightness level of the screen , Proximity sensorBased on this sensor signal device may control the volume of the voice speaker or dim the display during a call

Ingress ProtectionIngress Protection: 

Protection from solid materialsIngress Protection Standards. IP First digit: Protection from solid objects or materials  6 Totally protected from dust (no ingress)
Protection from liquidsIngress Protection Standards. IP Second digit: Protection from liquids  8 Persistently protected against immersion beyond 1 meter of depth
Immersion into liquids (depth limit)Device is protected against immersion into this depth of liquid (usually water) at most. (IP rating) 150 cm
Immersion into liquids time limitProtected against immersion into liquids within this time limit (in minutes).  (IP rating) 30 min

Power SupplyPower Supply: 

BatteryBattery technology  Lithium-ion polymer (LiPo)
built-inPossible options: removable, built-in
1-cellIn case of high power consumption it is more efficient to connect more than 1 cells in the battery in series to minimize current thus loss.
Nominal Cell Voltage (1st cell)Idle voltage of the charged battery cell 3.85 Volts
Nominal Cell Capacity (1st cell)The nominal mAh capacity of the first battery cell 4000 mAh cell
Nominal Battery VoltageIf there are more than 1 cells in the battery in series connection the nominal resulting battery voltage is the sum of voltage of cells 3.85 Volts
Nominal Battery CapacityIf there are more than 1 cells in the battery in parellel connection the nominal resulting battery capacity is the sum of capacity of cells 4000 mAh battery
Nominal Battery EnergyThe product of battery capacity and nominal voltage determines the maximal nominal stored energy in the battery 15.40 Wh
Standby TimeThe maximum standby time of the unused cell phone with active cellular radio (GSM, CDMA, iDEN, TD-SCDMA, WCDMA, LTE) and continuously refreshed dynamic RAM. 340 hours
Standby Current Calculated minimal value based on maximal standby time and nominal battery capacity (mAh). 12 mA
Talk Time 26.0 hours
Current During TalkCalculated minimal value based on maximal talking time and nominal battery capacity (mAh). 154 mA
Power Supply Controller ICManufacturer part number of the power supply controller IC or commercial name of the intellectual property (IP) if the controller is the part of a chipset Qualcomm PM845
Wireless ChargingWireless charging (like Qi, PMA) is a kind of near-field electromagnatic power transmission methods. Inductive coupling is created between a mobile device (secondary coil) and a special charger (primary coil), usually docking station or charging pad.  PMA wireless chargingPMA wireless charging standard was announced by IEEE Power Matters Alliance in January 2012. , Qi wireless chargingQi wireless charging standard was announced by Wireless Power Consortium in August 2009.

Geographical AttributesGeographical Attributes: 

Market CountriesCountries where the device was officially sold. Overlap is possible.  Japan
Market RegionsRegions where the device was officially sold.  Overlap is possible.  Asia
Mobile OperatorList of mobile operators (carriers) or distributors which sold the device in their own network NTT DoCoMoNTT DoCoMo

Datasheet AttributesDatasheet Attributes: 

Data IntegrityData integrity level determines the integrity of the published information. Final datasheets are not intended to be modified in the future, preliminary ones can be based on unofficial information or speculations, incomplete ones are also preliminary b  Final
AddedThe exact time of the datasheet addition 2018-08-19 23:32
 
You are here: Device Specs \ Samsung SM-N960D Galaxy Note 9 TD-LTE JP SC-01L / SGH-N058 (Samsung Crown) Detailed Tech Specs